Harm 2.0 robot lawnmower for lawns up to 1500 m2. Always a magnificent lawn!

Harm the robot mower is the most user-friendly robot mower there is. Just put the cable around the lawn and it works straight out of the box. You can easily choose the field area 300, 600 or 1000m2 and start testing. Harm automatically takes the edges and starts working automatically every 48 hours. Ensuring that you lawn always looks magnificent.

Mowing has never been easier with Harm!

Harm’s functions:

Programs
By choosing the area, the mower determines its mowing time.
300m ² : 4 hour working time, every 2 days, including charging time.
600m ² : 8 hours working time, every 2 days, including charging time.
1000m ² : 12hour working time, every 2 days, Including charging time.

The start time determines the moment when the mower starts mowing. If it is started at 3:00 PM, it will start again at 3:00 PM after 48 hours.

Security
PIN code protection prevents people from starting the mower unwantedly if it is stolen.

Emergency stop
The mower stops within 0.5 seconds after the red emergency stop is activated.

Automatic charging
The robotic lawnmower will automatically go to the charging station as soon as the battery is low, or its set time has expired.

Anti-collision sensor
With the anti-collision sensor the mower will avoid obstacles during its work.

Rain sensor
When it rains, the robotic lawnmower will automatically return to the charging station

Lift sensors
When the robot is lifted, the robot will stop and must be restarted manually.

Tilt sensors
The 6-axis sensor is integrated in the mower to measure the tilt angle in all directions.
As soon as the tilt angle exceeds 30 degrees, the motor of the blades will stop immediately, but the mower will continue to run. If the mower is less than 30 degrees within 10 seconds
When tilted, the motor of the blades will restart automatically. If the mower is not tilted less than 30 degrees within 10 seconds, the robot will stop
and must be restarted manually.

Harm’s package consists of

• Robot lawnmower Harm
• Charging station (with 4 pins to secure it)
• Connection cable
• Knife sets (can be used on both sides)
• Cable 100 meters
• 100x pins to secure the cable
• Measuring rod
• Keys
• 4 cable connectors
• User manual in Dutch, English, German and French

Harm’s installation

Installation is easy by setting up the cable around the lawn. The cable can be fixed with the supplied pins. The cable will not be visible within a few months. The cable can also be dug in or drawn under tiles. Connect the cables to the charging station and connect the power supply. Watch the instruction video to see how easy it is! 

* Promotion runs until June 22, 2020