- All products are added to your cart.
Zoef Robot robotic lawnmower Harm
- Article code MR40Z
- SKU MR40Z
- Article code MR40Z
- SKU MR40Z
Robotic mower Harm easy to use fantastic result!
Robotic mower is the most user-friendly robotic mower there is. Just put the cable around the field and work straight out of the box. You can easily choose by testing the field area 300, 600 or 1000m2 and start testing. Harm automatically takes the edges and starts working automatically every 48 hours. So that your lawn always looks perfect.
Mowing has never been easier with Harm!
By choosing the area, the mower determines its mowing time.
300m 2 : 4 hour working time, every 2 days, including charging time.
600m 2 : 8 hours working time, every 2 days, including charging time.
1000m 2 : 12hour working time, every 2 days, Including charging time.
The start time determines the moment when the mower starts mowing. If it is started at 3:00 PM, it will start again at 3:00 PM after 48 hours.
There is a key that is needed to switch the mower on once. If this is set in it can be deleted. This prevents people from starting the mower if it is stolen.
The mower stops within 0.5 seconds after the red emergency stop is activated.
The robotic lawnmower will automatically go to the charging station as soon as the battery is low or its set time has expired.
With the anti-collision sensor the mower will avoid obstacles during its work.
When it rains, the robotic lawnmower will automatically return to the charging station
When the robot is lifted, the robot will stop and must be restarted manually.
The 6-axis sensor is integrated in the mower to measure the tilt angle in all directions.
As soon as the tilt angle exceeds 30 degrees, the motor of the blades will stop immediately, but the mower will continue to run. If the mower is less than 30 degrees within 10 seconds
when tilted, the motor of the blades will restart automatically. If the mower is not tilted less than 30 degrees within 10 seconds, the robot will stop
and must be restarted manually.
- Robotic lawnmower Harm
- Charging station (with 4 pins to secure it)
- Connection cable
- Knife sets (can be used on both sides)
- Cable 100 meters
- 100x pins to secure the cable
- Measuring rod
- 4 cable connectors
- User manual Dutch, English, German and French
- Installation is easy by tensioning the cable around the lawn. The cable can be fixed with the supplied pins. The cable will then no longer be visible within a few months. The cable can also be dug in or drawn under tiles. Then connect the cables to the charging station and connect the power supply. Watch the instruction video above how easy it is!
Productreviews door klantenL. Dupan
Ik heb de Robotmaaier Zoef Harm nu ongeveer 3 weken. Keurige levering en de Robot ziet er prijs/kwaliteit heel stevig uit. De installatie met de permiter draad heb ik wel in het gras ingegraven. De aansluit connectoren van de permiter draad zijn wel heel licht gemaakt, dit is het enige die verbeterd kan worden. De robot zelf doet prima zijn werk in een tuin van 800 vierkante meter en gaat keurig naar zijn basisstation bij felle regen. Zeer eenvoudig te activeren zonder ingewikkelde programmatie. Zeer tevreden over deze robot!